2. Rusty floorboards, passenger side ok, driver side... well

Pulled up all the old rubber flooring. It had never been touched, still had the old "Jeep" embossed logos on it, but it was disintegrating.

Some rust on Passenger side, but it was pretty easy to get bad rust out and treat the rest. The entire frame is very good by the way.

Driver's side much more involved. This pic was after physically nearly pulling the accelerator out of the floor due to super thin rust section.

You can see I cut a test section out in the lower left of the pic where I could punch holes with a screwdriver. I haven't cut nearly enough yet! But you can see where the good bright steel is starting to reveal itself.